The PAS LE-3.2 software is an essential tool for audio technicians,
police officers, forensic technicians, countermeasures technicians, and
other audio related fields.
The program provides the user a audio
spectrum analyzer that is powerful and simple to use without complicated
menus and setup requirements. If you require a complicated engineering
program that costs hundreds - thousands of dollars, th...
Correlation Meter (giving you information about the the mono compatibility of a stereo and a Surround signal) you also can make easily Phase Check with this tool... Displaying in 1/3 Octave and FFT (31, 2048 Bands) Decay settings (Display speed) for the Spectrum in the Octave Mode, the FFT Mode and one for the VU-Meters Big Window (to have a full screen of the spectrum) see screen shot... Multi Mode Support. Switch between 4 Stereo Devices easily...
Leq(m), Leq dBA,Leq dBC, K-System (K-20, K-14, K-12) by Bob Katz , Level Meter norm > DIN45406, Level Meter norm > Nordic N9, # Level Meter norm > BBC PPM, Level Meter norm > EBU PPM, Integration time from none up to 300ms, Referenz Level 0 dBFS and -18 dBFS, Note detector, dBFS and RMS Peak Level Meter, Weighting filters dB(A), dB(B) and dB(C), 1/3, 1/6, 1/12, 1/24 Octave displaying of the Spectrum,
New in this version
Mixer Play List (use it like Windows Media Player)
Batch Restoration Tool for your MP3 files
Correlations Meter
RMS Level Meter and Peak Level for the Input and Output
integrated Compressor, Limiter und Enhancer
1/3 Octave displaying for the frequency bands
Automatic Calculation of Band Frequencies with Octave selector
DSP Normalization of Wave files
Programmable Frequency selection with independent Band Calculator
Progr...
The installation of the PAS Surround Meter for the use of discrete 5.1-mixtures is very easy as the six channels played by either the mixer sum or the HD-recording system will be connected directly with the inputs of the audio card installed on the computer for the PAS-software.
During the installation process, the user can decide about the display order of the surround channels. In the help files, the basic setup of the surround meter and all internal settings are described in detail. While the usual digital level indicators only show a scaling without norm status, five of the most established standardised scaling known from the analogue application can be used with the PAS Surround Meter. The commonly applied DIN45406 with a head room of 6 dB referred to digital 0, Nordic N9, BBC PPM and EBU PPM K-System K-20 K-14 K-12 are easily and individually recallable by using the Windows-function keys F1 to F 8
* Play 64 Mp3 or Wav files
* integrated Compressor, Limiter und Enhancer
* 4 differend pages a 16 files (Bank A,B,C and D)
* Choose the waveout device
* Choose your one Hotkeys (default F1 for File 1, F2 for file 2 .....)
* 14 different program skins
* Octalight, just for having fun
Try out the free beta version.
See screen shots and read more about the 16 Track Player here:
# NEW in this version
# Oscilloscope srcoller and accelerator
# Efects like Peak and Splitt
# Oscilloscope kinds like Con. Lines, Dots, Mir Lines, Spikes, Vert. Lines
# Analyse the real time input in the Oscilloscope
# Now you can record the generated Tones into a Wavefile
# Level Meter calibrated to 1/100 of a dB
Frequency Generator contains 3 Generators, you can choose between
Sine, Square, Triangle, SawtoothNeg, SawtoothPos, Pink Noise
Total...
Graphic Equalizer Studio --
Programmable 31 band display with thousands of configuration possibilities
Automatic Calculation of Band Frequencies with Octave selector
DSP Normalization of Wave files
Programmable Frequency selection with independent Band Calculator
Programmable Q-Factor for fine-tuning separate configurations
Configurations saved in 2 convenient locations for reloading all project data
Automated Equalization of Live A...
* Neu in this version
* Correlations Meter
* RMS Level Meter and Peak Level for the Input and Output
* integrated Compressor, Limiter und Enhancer
* 1/3 Octave displaying for the frequency bands
*
* Automatic Calculation of Band Frequencies with Octave selector
* DSP Normalization of Wave files
* Programmable Frequency selection with independent Band Calculator
* Programmable Q-Factor for fine-tuning separat...
Best of all, the program has a Remote Control interface that allows
you to drive the MIDI Program Change Manager from other units.
If you are performing a MIDI program change from a mixing board,
you can change all your settings that you have previously programmed.
Additional features include:
MIDI Input Monitor for the incoming MIDI Messages (Message, Data1, Data2)
MIDI Mixer with 10 Controllers, for your own programming
MIDI Ou...
This sophisticated piece of software turns your computer into a modern, State-of-The-Art spectrum analyzer giving you features that are available in stand-alone hardware units costing thousands of dollars.
The PAS LE-3.2 software is an essential tool for audio technicians, police officers, forensic technicians, countermeasures technicians, and other audio related fields. The program provides the user a audio spectrum analyzer that is powerful a...
Analysis Center Version 3.0
We decided to structure the Analysis Center 3.0 in Modules.
Now the software is more flexible and you can choose exactly what you need.
In addition to the normal Analysis Center, you can have the Printer Module,
Background Module, and the FTP Upload Module.
In addition to the original functions in the Analysis Center 3.0, you have:
Wave recording for the line in and the mic input
Mp3 player to analyze Mp3...
This sophisticated piece of software turns your computer into a modern, State-of-The-Art spectrum analyzer giving you features that go far beyond the possibilities of any stand-alone hardware unit.
An important advantage of your new analyzer software is the fact that your computer monitor is a far better means of displaying analyzer measurments than any LED or LCD bar. By making use of standard computer operations your analyzer software will sto...
24 Channel Multi Meter Bridge
PAS Multi Meter Bridge can be configured in a number of different ways, to accurately model the ballistics, responses and graphics of a wide range of standard peak programme meters. These meters currently include the following:
IEC 268-10 Type I (Nordic N9 meter)
DIN 45406
IEC 268-10 Type IIa (BBC PPM meter)
IEC268-10 Type IIb (EBU PPM meter)
Integration times none, 5ms, 10ms, 15ms, 20ms and 300ms
PAS-Products
Fr...
This program offers comprehensive spectral analysis of real time or pre-recorded audio. # K-System (K-20, K-14, K-12) by Bob Katz
# Level Meter norm > DIN45406
# Level Meter norm > Nordic N9
# Level Meter norm > BBC PPM
# Level Meter norm > EBU PPM
# Integration time from none up to 300ms
# Referenz Level 0 dBFS and -18 dBFS It also contains an Mp3Player and converter (Mp3 to wav and vice versa). Critical Data includes the display of Amp, db, and frequency.
These results may be saved in text files for further evaluation. A Peak Detector offers 12 user programmable frequencies to evaluate an audio file. A precise Snyc to loop feature offers documented peak frequency analysis..
A built-in generator monitors the balance between input and output. The program provides calibration of Input and Output levels to the soundcard for correct line-in level recording. A 3D Wavelet Transform Display creates an
active scrolling feature. An average function calculates the average value and maximum amplitude of a given signal.
This sophisticated piece of software turns your computer into a modern, State-of-The-Art spectrum analyzer giving you features that go far beyond the possibilities of any stand-alone hardware unit.Displaying in 1/3, 1/6, 1/12, 1/24 Octave frequency displayinge and FFT (2048 Bands) Decay settings (Display speed) for the Spectrum in the Octave Mode,, dBFS and RMS Peak Level Meter-Meters Big Window (to have a full screen of the spectrum)
At this software it concerns a combined level and correlation meter for Surround signals for the 5.1-Standard.
The levels of all six channels as well as the phase correlation between all combinations of two channels are represented, so that defined statements are possible for the mono compatibility of a stereo and a Surround signal, in addition, for the Stereo compatibility of a Dolby Prologic signal or a 5.1-Signals in the Downmix.
Also the ...
