PTZ Controller is an application to control Pan Tilt Zoom High Speed Dome. It is a virtual keyboard for PTZ camera. It can control the PTZ camera through RS232 port directly, or through RS485/USB port with a converter. It supports multiple protocols. User-defined and keyboard shortcut functions make it more powerful than traditional PTZ keyboard hardware. It's also a good debug tool for PTZ camera's test and install. It is a robust, easy-to-use PTZ keyboard controller.
Features
Support Pelco D,Pelco P, AD ASCII, AD Manchester, Bosch, Sony, Panasonic, Samsung and LG-MULTIX protocols
Control up to 255 cameras
Support up to 127 separate preset position for each camera
Each camera and preset position can be renamed
Separate panel for controlling the menu of PTZ camera
Flexible auto scan function with Preset Scan and Auto Pan
Support 10 auxiliary functions
Support 12 customized functions
Support sending user-defined Hex data
Support keyboard shortcut
Detect all available COM Port automatically
Easy to use without training
Customized service for other protocols
PTZ Controller PPC is an application for Pocket PC to control PTZ camera. It runs on PPC2003SE or WM5.0. It can perform the full function of traditional hardware keyboard controller. It can control the PTZ camera through Pocket PC Compact Flash slot, and control RS232/485/USB port with a converter. It can also act as a debug tool for device's install and test. All available COM ports can be detected automatically. It supports Pelco D/ P protocol. The friendly GUI makes controlling PTZ camera easy and convenient.
PTZ Controller PPC is a robust, easy-to-use, multi-feature 232/485/USB PTZ camera controller tool. Comparing to its PC version, it is more mobile and portable. It features the following elements.
1.Mobile and Portable: Carry it anywhere so that you can control your PTZ camera anytime. No more need to laptop, no additional carry out for onsite debug and installation. It changes the way of previous video surveillance camera install step and make it becoming/ become an enjoyable process.
2. User Friendly GUI: Use it as if using a hardware controller without training.
3. Multi Protocol Support: Easy to change different protocol (Pelco D or Pelco P) to control the PTZ dome.
4. Scalable: Port changeable, baud rate changeable, multi device enable. All available COM ports can be detected automatically.
Comm Operator NCD Edition is a simplified edition of Comm Operator v2.0. It is a custom-made edition for relay controller boards of National Control Devices (NCD). It is a powerful tool for relay controller boards of NCD.
It can detect all COM ports automatically regardless of whether they are real COM ports on motherboard or on supplementary in/output boards, or virtual COM ports created by special drivers.
It can send and receive data through COM port. The speed it supports range from 110 to 921600.
It supports data input in decimal format which required by relay controller boards of NCD.
The propery of Auto Send makes it a full functional device simulator. Device can be used directly without programming.
It includes commands for ProXR relay controller boards. It's very convenient to debug or test the relay controller boards.
It can keep log of the sent and received data. All setting can be saved to file and loaded later.
Unified operating GUI and integrating with F1 help make it easy to use.
Relay Timer Lite is programmble timer software for 8-channel ProXR relay boards of National Control Devices. Each relay can be programmed separately with multiple schedules. Recurrence options make schedule setting more powerful and flexible. Relays can be turned on/off manually. The status of all relays can be shown. It can control the relays with very precise timer, while consuming the processor's resource at very low level. It is robust, real-time and easy to use.
Features:
Supports 8-channel ProXR relay boards. Each relay has a control panel separately.
Supports multiple schedule setting for each relay.
Powerful schedule setting with recurrence options.
Supports auto start after logging in Windows.
Turn on/off each relay manually and automatically.
Turn on/off or invert all relays directly.
Display the current status of all relays simultaneously.
Automatically switch to auto mode from manual mode after specified time.
Status of relays can be saved for later loading.
Time setting can be saved for later loading.
Easy to use with friendly GUI.
Comm Operator is a powerful tool for serial port, TCP/IP and UDP communication. It is professional software for debugging, testing and troubleshooting RS232 related devices.
It supports Quick Send for standard, terminal, NCD relay boards. It supports sending and receiving data in Text, Hex and Decimal format. It also supports sending a file. Data can be sent repeatedly and automatically from predefined list in order. Multiple send data lists can be created from text, hex and decimal files directly. Data can be copied and pasted between different list. It has built in checksum calculator. It keeps log file automatically in specified folder. The list file can be opened by dragging and dropping. All existed COM Ports can be detected automatically. All settings can be saved to a file for later use. COP file can be created for Comm Operator Pal. Auto send mechanics makes it a full functional device simulator. Unified operating GUI makes it easy to use.
Features
Communicate with Serial Port, TCP/IP and UDP
Send/receive data in Text, Hex and Decimal format
Support sending a file
Support quick send panel for NCD relay boards
Support terminal panel and RST/DTR control
Send data repeatedly with specified interval
Send data automatically according to predefined rules
Send large data in a seperate thread
Support three methods for checksum
Work with multiple send data list files
Support auto log function
Create send data list in different format from specific file
Copy and paste data between different list
Drag and drop to open send data list directly
Keep log file automatically
Detect all existed COM ports automatically
Keep all settings for later use
Create COP file with current setting and data list for Comm Operator Pal.
Quick Timer is programmable timer software for NCD ProXR relay control boards. It supports one relay board with 16 channels. Each channel has a control panel separately. Relays can be turned on/off manually and automatically according to powerful time setting. The status of all relays can be displayed simultaneously. Time can be set with counting down or up. It supports rapid buttons to control all relays directly. All settings can be saved for later loading. Quick time setting makes it easy to use for science project, laboratory experimenter and home automation and so on.
Features:
Support 16-channel ProXR relay boards with control panel separately.
Support time setting with counting down and up.
Turn on/off each relay manually and automatically according to powerful time setting.
Support rapid buttons for turning on/off all relays directly.
Display the current status of all relays.
Status of relays can be saved for later loading.
Time setting can be saved for later loading.
Beautiful GUI, easy to setup and use.
Relay Timer PPC is a useful tool for NCD ProXR relay controller boards with Pocket PC. It supports 1 board with 8 relays. Each relay can be programmed separately with multiple timers. Relays can be turned on/off manually and automatically according to the time setting. The status of all relays can be changed and displayed at the same time. It can control the relays with very precise timer, while consuming the processor's resource at very low level. It can work on PPC2003SE, WM5.0 and WM6.0. It is robust, real-time, and easy to use.
The features of Relay Timer PPC include:
Support 8 relays. Each relay has a control panel separately.
Support multiple timers. Up to 255 timers can be set for each relay.
Support turning on/off each relay manually and automatically.
Support turning on/off and inverting all relays directly.
All existed COM ports can be detected automatically.
Status of relays can be saved for later loading.
Time setting can be saved for later loading.
Change between Landscape and Portrait modes automatically.
Beautiful GUI and easy to setup.
Relay Timer PPC only supports ProXR relay controller boards of National Control Devices (NCD) for now. Customized service for other boards is available.
Quick Timer PPC is an application for Pocket PC to control NCD ProXR relay boards. High resolution timer and quick setting make it easy to use for light control science project, laboratory experimenter and home automation. It supports 8-relay channels. Each channel has a control panel separately. Relays can be turned on/off manually and automatically. Time can be set with counting down or up. It supports rapid buttons for control all relays directly. It runs on PPC2003SE, WM5.0 and WM6.0. Friendly interface makes it easier to use.
Features:
High resolution timer with millisecond.
Support 8-relay channels with control panel separately.
Support time setting with counting down and up.
Support turning on/off each relay manually and automatically.
Supports turning on/off all relays directly.
Display current status of all relays.
Display left or passed time of each relay.
Status of relays can be saved for later loading.
Time setting can be saved for later loading.
Beautiful GUI, easy to setup and use.
Quick Timer High is high resolution programmable timer software with millisecond for NCD ProXR relay controller boards. It supports one relay board with 16 channels. Each channel has a control panel separately. Relays can be turned on/off manually and automatically according to powerful time setting. The status of all relays can be displayed simultaneously. Time can be set with counting down or up. It supports rapid buttons to control all relays directly. All settings can be saved for later loading. Quick setting and high resolution make it quite fit for accuracy control on light, science project, laboratory experimenter and home automation.
Features:
High resolution timer with millisecond.
Support 16-channel ProXR relay boards with control panel separately.
Turn on/off each relay manually and automatically according to powerful time setting.
Time can be set with counting down or up.
Supports rapid buttons for turning on/off all relays directly.
Status of relays can be saved for later loading.
Time setting can be saved for later loading.
Beautiful GUI, easy to setup and use.
Comm Operator PPC is a powerful RS232 device emulator on Pocket PC.
It supports communication with both serial port, include rs232, rs422, rs485 and TCP & UDP based protocol.
It works with Wifi, Ethernet and Bluetooth besides normal serial port.It supports data in Text, Decimal as well as Hex format.
It also can keep log of the sent and received data. All setting can be saved to a file and loaded later.
It can act as peripheral devices connected with COM port, such as GPS receiver, total station and other devices, like rs232 relay boards. It can also act as a debug tool for device's test and development.
It features the following elements:
Support Bluetooth serial port
Support Wifi network
Support TCP/IP protocol based communication
Support UPD protocol based communication
Support baud rate from 110 to 961200
Support data in Text, Decimal as well as Hex
Send multi data in order manually
Import and export the sent data easily
Share data with Comm Operator PC version.
Relay Timer is a powerful programmable timer for NCD ProXR relay controller boards. It supports up to 16 relay boards with 16-channel relays on each. Relays can be programmed separately with multiple schedules. Relays can also be turned on/off manually. Customized options make schedule setting more powerful and flexible. As the specialized software that intends to control the peripheral devices, the status of all relays can be shown and operated at the same time. It can detect all existed COM ports automatically. It can be set to run automatically after loggning in Windows. It's very convenient to control lights, motors, drippers, pumps, bells, audio, video signals and home automation.
