|
home > MISC › Electronics- Free Downloads at Simtel.net
Electronics| Found: 34. Displaying: 1-20 |  |  |
 | RelayRunner 335 3.3.5 |  | Control any electrical device that is switched on/off.
RelayRUNNER is the perfect timing software to control hydroponics, relays, solenoids or lights from a computer.
Simple, easy to use interface enables the PC to connect to the outside world using a wide variety of Industry Standard Relay Cards or LPT/Parallel port relay cards or the X10 Firecracker Module.
RelayRUNNER features include day of week, 6 times each day, cyclic within a time range, Top/Mid/Tail of hour, Manual, Invert, ... |
|
 | RVal 1.11 | | RVal is a program for Electronic Engineers and hobbyists. It will find the nearest preferred resistor values satisfying certain criteria or all within a given tolerance, in whichever range of preferred values the user selects. All the standard value ranges are supported; they are E6, E12, E24, E48, E96 and E192. Preferred values can be selected according to the following criteria:
* The nearest preferred value to that specified.
* The pair of preferred values having the closest approximation to... |
|
 | al2or16.zip 1.6 | | Altera to OrCAD is a simple utility that allows you to create a symbol for OrCAD, based on the contents of an Altera Max-Plus II Configuration File (ACF). The tool reads an ACF file to extract user defined pin name/number/type information. This information is combined with information optionally present in a libary file (altera.ded) which contains definition of dedicated pins for a given part/package. The output is an EDIF representation of the symbol which can be imported directly into OrCAD Ca... |
|
 | VIOM Data Logger 1.0 | | Data Logging application using a PC Serial Port with a VIOM data I/O Module. The application can control 16 outputs and can monitor the 16 inputs. Changes to the inputs can be logged to screen and / or directly to disk for background recording. All logging includes a date and time stamp. Logging inputs and outputs can be assigned descriptors which are used for both the onscreen LED-like display and as part of the logged data.
Logging can be controlled so that only specific events are logged such... |
|
 | Parallel Port Customizer 2.0 | | Description:
I coded Parallel Port Customizer for a friend who wanted to control an external electronic device using his PC.
He told me that it would be nice to use the single pins of the parallel port to turn on / off those tiny devices like transistors and stuff like that. Cause he didn't find any tool solving his problem I offered him to code one for him.
So, if you are interested in electronics this should be a nice testing tool for you!
You may think 'This GUI application isn't really supp... |
|
 | FreqGenie 1.0 | | Description:
This tool gives you the possibility to use your internal PC-speaker as a little frequency generator!
You may just test your ears or you even solder a little outlet to the PC-speaker wires to get the signal out of the box supplying special electronic devices (i.e. a scope)...
Features:
7 Supported frequencies: 20 Hz - 100 kHz
7 Uses the common internal speaker controller PIT 8253/4
7 DirectX (DSound) and WinNT/2k support in future releases
Benefits:
7 Coded in 100% pure assemble... |
|
 | Handheld Handler 1.01 | | Go beyond the physical limitations of handheld computer displays and stylus-limited data-entry with Snowshoe's Handheld Handler. With its integrated device-specific video drivers and built-in remote control capabilities, the Handheld Handler delivers a solution that promotes your handheld from a gadget, to the only computer you need.Snowshoe Handheld Handler enables you to connect your handheld computer to any workstation and work on your handheld using existing standard desktop monitor, keyboar... |
|
 | RColours 1.00 | | RColours converts the colour bands commonly found on resistors into the value of that resistor or it converts a given value into the colour bands that would be used to represent that value. 3 and 4 band representations are supported and the user can switch between the two to compare the result (the value is held constant and the colour bands altered to suit).
The value is displayed or can be entered in the industry standard 1K2 style. The colours are displayed on a picture of a resistor as well... |
|
| Found: 34. Displaying: 1-20 | | |
|
