|
home › MISC › Ham Radio programs and information- Free Downloads at Simtel.net
Ham Radio programs and information| Found: 171. Displaying: 1-10 |  |  |
  | coil02.zip 0.2 |   | This program computes the electrical self inductance of various shapes and sizes of air core coils. Geometries include circular solenoidal current sheet, straight round wire, N-turn circular loop, circular toroid with circular winding, multi-layer square solenoid, circular toroid with rectangular winding, multi-layer circular solenoid, single-layer circular solenoid of round wire, single-layer square solenoid. Wire gauge calculation and dimensions in inches or centimetersare included.
The formulas for a multi-layer circular solenoid were obtained from National Bureau of Standards publications and are very accurate. They work for arbitrary winding thickness and length. A flat spiral disc coil is obtained by setting the length = 0. Also very precise is the NBS formula for a helical solenoid of round wire. It models the size of the wire and the nonuniform
current density inside the wire. In the case of a single-turn loop or a straight piece of wire, a
skin effect correction is computed. This requires that you enter the frequency of operation. The wire is then assumed to have the conductivity of copper. The inductance formulas are derived from the works of Butterworth, Dwight, Grover, Lyle, Nagaoka, Rosa, Snow, and Speilrein.
Included in the archive are a DOS executable program and C language source code.
Build scripts for the program are provided for Microsoft Visual C, Borland C 4.5,
VAX C, MSC, and unix systems. The program runs as a command line application.
Options and values are entered in a menu-style display format. |
|
 | SNAPmax501 5.01 | | SNAPMax v5.01 calculates 1.5 to 45 MHz HF/MF radio propagation, including signal strength, signal-noise ratio and circuit quality, as well as MUF, LUF and FOT, and saves any three paths for future reference. Transmitter and receiver locations can be input either by call prefix or by latitude and longitude, and many can be selected by name too. Path loss analysis enables users to select different or better times, routes and frequencies, and gives a graphic breakdown of all noise sources. Other inputs are antenna gain, adjusted for take-off angle, and modulation schemes including digital modes, for assessing circuit quality, including multipath delay. The program supports long path, antipodean enhancement, and chordal hop. WWV ionospheric storm indexes (A or K) are used to determine polar path auroral losses, also MUF depression during storm events. E layer paths are assessed and ground-wave coverage is also calculated. Noise data for most major countries world-wide is provided, as is a simple graphic of probable noise levels across HF bands for any location. An expanded low frequency scale (2-12 MHz) improves low band displays for NVIS etc.
MUF is determined using the Fricker (BBC) algorithms, losses being determined by George and Bradley's method using an internal world-wide vertical absorption map. An approximate MF algorithm is used for top-band. Gyro-frequency is also mapped, as are terrestrial reflection points to take correct account of reflection from ground or oceans. More detail is to be found in Crawford MacKeand's book "The Friendly Ionosphere", also from Tyndar Press, and detailed operating descriptions are included with the zipped file for SNAPMax. Finally, SNAPMax501 supersedes shareware SNAPMax3.63 and is now FREEWARE for any non-commercial uses.
Crawford MacKeand WA3ZKZ, VP8CMY, ex-G4ARR |
|
| Found: 171. Displaying: 1-10 | | |
|
